Battery Status - Philips Sonicare ProtectiveClean 4100 Serie Bedienungsanleitung

18
English
Charging and battery status
Charging

Battery status

Battery status
Charging
Full
This Philips Sonicare toothbrush is designed to provide at
least 28 brushing sessions, each session lasting 2 minutes
(14 days if used twice per day) on a fully charged battery.
The battery indicator shows the battery status when you
complete the 2-minute brushing session, when you pause
the toothbrush, or while it is charging.
Note: It can take up to 24 hours to fully charge the
battery before first use, but you can use the Philips
Sonicare toothbrush before it is fully charged.
Charging on charger or UV Sanitizer
1 Plug the charger or sanitizer into an electrical outlet.
2 Place the handle on the charger or sanitizer.
- The handle emits 2 short beeps to confirm that the
handle is placed properly.
- The flashing light of the battery indicator shows that
the toothbrush is charging.
- When the handle is fully charged on the charger, the
battery indicator lights up green for 30 seconds and
then switches off.
Battery status (handle on plugged-in charger)
When the handle is placed on the charger, the battery
indicator shows the battery level.
Battery status (handle on plugged in
charger/charging travel case)
When the handle is placed on the charger or in the
charging travel case, the battery indicator shows the
battery level.
Battery indicator
Flashes green
Solid green for 30 seconds and then
switches off