Intended Use; Scope Of Delivery; Product Description - VOLTCRAFT VSM-105-60 Bedienungsanleitung

2. INTENDED USE

The product is used as 3-phase/4-conductor or single-phase alternate current meter (L2) in meter place systems with meter rooms pursuant
to DIN VDE0603 part 1, DIN 43853.
With the "VSM-105-receiver" (Conrad order no. 125447), the meter is compatible with "Gateway VSM-101" and can be evaluated with the
"VSA" evaluation software.
Any use other than that described above is not permitted. Misuse may not only damage the device, but also leads to risks such as short cir-
cuiting, fire, electrical shocks. The product may not be altered or converted. The safety notes and the maximum permissible operational and
ambient conditions stated in the chapter "Technical Information" must be observed at all times.
Read these operating instructions thoroughly and carefully, they contain a lot of important information for assembly, commissioning and operation.

3. SCOPE OF DELIVERY

• VSM-105-60 meter
• Operating instructions

4. PRODUCT DESCRIPTION

1 Data interface (D0)
2 LC display
3 Test LED
4 User fuses
The meter casings are welded and performed as "sealed forever" devices.
The impulse outputs have a constant rate of 10,000 imp/kWh and are only active when energy is measured. The devices have a repercus-
sion-free, transmission-only optical D0 interface pursuant to DIN EN 62056.
13