Bosch PSB 600 RE Bedienungsanleitung Seite 10

Machine Elements
1 Keyless chuck
2 Spindle lock
3 "Drilling/Impact Drilling" selector switch
4 Lock-on button for On/Off switch
5 On/Off switch
6 Thumbwheel for speed preselection
(PSB 600 RE/PSB 640 RE/PSB 650 RE/
PSB 700 RE)
7 Rotational direction switch
(PSB 600 RE/PSB 640 RE/PSB 650 RE/
PSB 700 RE)
8 Button for depth stop adjustment
9 Winged screw for auxiliary handle
adjustment
10 Auxiliary handle
11 Depth stop
12 Chuck key
13 Key chuck
14 Allen key*
15 Vibration damper
(PSB 650 RE/PSB 700 RE)
16 Screwdriver*
* Not all of the accessories illustrated or described are
included as standard delivery.
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the en-
closed booklet must be ob-
served.
Wear protective glasses and hearing protec-
tion.
For long hair, wear hair protection. Work only
with closely fitting clothes.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
10 • 2 609 932 184 • 02.07
Insert the mains plug only when the machine is
switched off.
Always direct the cable to the rear away from
the machine.
When drilling use the auxiliary handle 10.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assist-
ance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
If the drilling tool jams, it will cause the power
tool to jolt. If this occurs switch the machine off
immediately.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Be careful when screwing in long screws; dan-
ger of sliding off.
When screwdriving, operate in first gear as
well as with a low speed.
Set the machine against the screw /nut only
when switched off.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
Never allow children to use the machine.
Bosch is only able to ensure perfect operation
of the machine if the original accessories in-
tended for it are used.
Intended Use
The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling in
wood, metal, ceramics and plastics. Machines
with electronic control and right/left rotation are
also suitable for screwdriving and thread-cutting.
English - 2