MSI KA790GX-Serie Bedienungsanleitung Seite 23

M S-7551 M ainboard
Serial ATA Connector: SATA1~5
This connector is a high-speed Serial ATA interface port. Each connector can con-
nect to one Serial ATA device.
SATA1
SATA2 SATA4
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
En-14
SATA3 SATA5
GND
CINTRU
1