MSI KA790GX-Serie Bedienungsanleitung Seite 16

Installing AMD Socket AM2+/AM2 CPU Cooler Set
W hen you are installing the CPU, make sure the CPU has a heat sink and a
cooling fan attached on the top to prevent overheating. If you do not have the
heat sink and cooling fan, contact your dealer to purchase and install them before
turning on the computer.
Important
1. Read the CPU status in BIOS.
2. Mainboard photos shown in this section are for demonstration of the CPU/
cooler installation only. The appearance of your mainboard may vary depend-
ing on the model you purchase.
1. Position the cooling set onto the
retention mechanism.
Hook one end of the clip to hook
first.
3. Fasten down the lever.
2. Then press down the other end
of the clip to fasten the cooling
set on the top of the retention
mechanism. Locate the Fix Lever
and lift up it .
Fixed Lever
4. Attach the CPU Fan cable to the
CPU fan connector on the
mainboard.
En-7