Copy Card Reader-F1; Super G3 Fax Board-Ap1 - Canon 4251i Anwenderhandbuch

Copy Card Reader-F1

Item
Available Cards
Card Readout Method
Magnetic Card Reading Direction
Store/Replay
Power Source
Dimensions (H x W x D)
Weight

Super G3 FAX Board-AP1

NOTE
Specifi cations remain the same even when the Super G3 2nd Line Fax Board is installed.
Item
*1
Telephone Line Used
Scan line Density
(Scan, Transmission)
Transmission Speed
Compression Method
Transmission Type
Sending Original Sizes
Receiving Paper Sizes
Transmission Times
Auto Dial Function
Image Memory
* 1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is
recommended to use facsimile communication via a general telephone (Public Switched Telephone Network) line.
* 2 Pels stands for picture elements (pixels).
* 3 Sent as A4.
72 Appendix
Magnetic
Magnetic readout
Inserting Direction
Replay
From the main unit
40 mm x 88 mm x 96 mm
(excluding the attachment kit and cable)
Approximately 200 g
(including the attachment kit and cable)
Public Switched Telephone Network
*2
Normal: 8 pels /mm x 3.85 line/mm
Fine: 8 pels *2 /mm x 7.7 line/mm
Super-Fine: 8 pels *2 /mm x 15.4 line/mm
Ultra-Fine: 16 pels *2
Super G3: 33.6 kbps, G3: 14.4 kbps
MH, MR, MMR, JBIG
Super G3, G3
*3 *3
A3, A4, A4R, A5 , A5R
A3, A4, A4R, A5, A5R
JBIG: Approximately 2.6 seconds
Address Book: 1,800 destinations
(including destinations stored in one-touch buttons)
Approximately 20,000 pages
Specifi cations
Specifi cations
/mm x 15.4 line/mm
4