Handling Precautions - Canon 4251i Anwenderhandbuch

•
When the Color Image Reader Unit-H1, Inner
Finisher-D1, External 2 Hole Puncher-B2, and
Paper Deck Unit-B2 are attached:
100 mm or more
1,666 mm
•
When the Color Image Reader Unit-H1, Booklet
Finisher-G1, External 2 Hole Puncher-B2,
Buff er Pass Unit-H1, and Paper Deck Unit-B2
are attached:
100 mm or more
2,105 mm

Handling Precautions

•
Do not attempt to disassemble or modify the
machine.
•
Some parts inside the machine are subject
to high-voltages and temperatures. Take
adequate precautions when inspecting the
inside of the machine. Do not carry out any
inspections that are not described in the
manuals for this machine.
1
•
Be careful not to spill liquid or drop any
foreign objects, such as paper clips or staples
inside the machine. If a foreign object comes
into contact with electrical parts inside the
machine, it might cause a short circuit and
result in a fi re or electrical shock.
•
If there is smoke, or unusual noise,
immediately turn the main power switch OFF,
disconnect the power cord from the power
outlet, and then call your local authorized
Canon dealer. Using the machine in this state
may cause a fi re or electrical shock. Also, avoid
placing objects around the power plug so that
the machine can be disconnected whenever
necessary.
•
Do not turn the main power switch OFF or
open the front covers while the machine is in
operation. This may result in paper jams.
Preface 19