Maintenance And Cleaning; Technical Data - Conrad 1218294 Bedienungsanleitung

4. Note that due to the IR light, photos or videos are in principle made in black & white. The IR light is
switched on automatically if the brightness sensor integrated into the game camera detects an ambient
brightness which is too low.
g) Additional functions
1. The game camera can be operated via an external power supply for stationary operation. A power supply
with a stabilized output voltage of 6 V/DC and an output current of 2 A is needed for this purpose. The
middle contact of the low voltage circular connector must be "+", the external contact "-". A suitable
circular connector should be included with the power supply (external Ø 4.0 mm, internal Ø 1.7 mm).
2. The batteries are switched off if a power supply is connected.
3. When the bottom cover (7) is closed, the rubber cover (5) can be opened to insert the low voltage circular
connector.
4. Photos or a video image can be displayed on a TV or monitor via the TV out (28) connection. A
corresponding video cable is included in the scope of delivery. Note that videos cannot be played back.
Only the first picture of the video is displayed, however, not the running video image. The displayed
image on the TV is the same as on the LC display and the menu is navigated on the camera. The PAL or
NTSC colour system is recognised automatically by the camera.
5. You can transfer the data to a PC to play videos and use a suitable video playing software there.
6. The game camera can be connected to a computer via the mini USB connection (30) to read and copy
the data of the memory card like from a card reader. The game camera must be switched off before for
this purpose (switch OFF / ON / TEST to OFF). Connect the mini USB plug of the USB cable provided to
the mini USB connection of the camera and the USB A plug to a free USB connection on your computer.
Normally it is advisable to take the memory card out of the game camera to be able to read it
with a conventional memory card reader. The transmission speed is also higher here for the
most part.
7. The eye (22) below the safety lever can be used to safeguard the bottom cover from unauthorized
access with a lock.

Maintenance and cleaning

• There are no components located inside the product you need to maintain. Never open/dismantle the
product.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
• Before cleaning, turn off the camera and disconnect all cables that might be connected to it.
• Regularly wipe down the camera using a dry cloth. Keep the camera lens clean.
• Remove the batteries when the product is not in use.
• Store the product at a dry, clean location shielded from direct sunlight and out of the reach of children.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries. Disposing of them
in the household waste is prohibited.
Contaminated batteries are labelled with this symbol to indicate that disposal in the domestic
waste is forbidden. The designations for the heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on batteries, e.g. below the trash icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

Technical data

a) General
Power supply
Batteries (not supplied) ..................................4 x 1.5 V/DC batteries type AA/LR6
Mains adapter (not supplied) .........................6 V/DC, 2 A or 12 V/DC, 1 A
.......................................................................(round connector: external Ø 4.0 mm, internal Ø 1.7 mm)
Current consumption without IR LED ............max. 150 mA
Current consumption with IR LED .................650 mA
Current consumption Standby .......................0.4 mA
System requirements .....................................PC/Notebook computer with
USB cable length ...........................................85 cm
Video cable length .........................................145 cm
Fastening strap length ...................................145 cm
Operating conditions ......................................-30 to +70 ºC, 5 – 95 % RH, non-condensing
Storage conditions .........................................-30 to +70 ºC, 5 – 95 % RH, non-condensing
Dimensions (W x H x D) ................................approx. 90 x 135 x 73 mm (with battery box)
Weight ...........................................................approx. 280 g (without batteries)
b) Camera
Camera lens, effective visual angle ...............55°
Number of IR LED .........................................44 pieces
IR LED wave length .......................................940 nm
Effective range of the
IR LED for pictures/video ...............................up to 20 m
Picture/video recording ..................................day: colour, night: black-and-white
Motion detector detection range ....................up to 20m (at 25°C)
Detection angle
middle motion detector ..................................35°
Detection angle per
side motion detector ......................................10°
Trigger time....................................................0.6 sec., when using a 2 GB SD card
Image sensor .................................................5 MP colour sensor CMOS
Image resolution ............................................12 MP (interpolated), 5 MP
Video resolution .............................................HD 720p (frame rate 20/second),
Multi-shot setting ...........................................1 to 3 pictures
Video recording length ...................................1 to 60 seconds
Interval setting (rest period) ...........................0 seconds to 60 minutes
TV output .......................................................PAL, NTSC
Image format/video format .............................JPG / AVI
White balance ................................................automatic
Exposure control ............................................automatic
LC display ......................................................colour
External memory medium ..............................SD card, max. 16 GB (SDHC)
Automatic switch off .......................................approx. 3 minutes,
USB standard ................................................USB 2.0
IP protection type ...........................................IP 54
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright 2015 by Conrad Electronic SE.
Battery box expandable: 4 x 1.5 V/DC batteries type AA/LR6
Windows XP (Home, Pro with SP1, SP2, SP3, only 32 bit),
®
Vista (32/64 bit), 7 (32/64 bit), 8, 8 Pro, 8.1
VGA 640 x 480, 320 x 240 (frame rate 30/second)
if no button is pressed and no function executed
V2_0215_02-HK