Initial Operation - Conrad RCA TH1602 Bedienungsanleitung

8. Inserting the battery / micro SD card
• Remove the battery compartment cover on the rear (see
image in the right).
• Insert a 1.5 Volt micro battery (type AAA) observing the
correct polarity.
• Replace the battery compartment cover.
• Open the "micro SD card slot" (1) by carefully sliding the
cover to the side.
• Insert a micro SD card into the Micro SD card slot (1) if
desired. Slide the micro SD card as far into the "Micro SD
card slot" (1) until you hear a "click".

9. Initial operation

• Pop out the "USB connection" (5) and insert this into a
free USB slot on your PC or laptop.
19