Setup; Connection - Renkforce EQ-1000 Bedienungsanleitung

Setup

When selecting the installation site, consider the room conditions, meaning the location of the next outlet, etc. Also
prevent direct sunlight, vibrations, dust, heat, cold and dampness. Keep the appliance away from strong transformers
or motors.
The device should be operated only on a stable, level surface. There must be enough space for
air circulation to permit dissipation of the generated heat. Therefore, only place the device on
a level surface and not on carpets, etc. Do not cover up the ventilation slots in the casing.
If you do not heed these instructions, the device may be damaged.
Do not drill extra holes or screw any extra screws for mounting purposes into the case. This will
damage the device.
Make sure you position the appliance in a safe and stable place, away from objects that might
fall on it, thereby avoiding unwanted accidents.

Because of the variety of lacquers and polishes used for furniture, the device base might leave residues
on furniture due to a chemical reaction. Thus do not place the device without appropriate protection on
valuable furniture surfaces.

Connection

Before connecting the device, ensure that the mains plug is disconnected. Similarly, all other
devices to be connected should be disconnected from the electricity supply.

Ensure that connections are made the correct way round, that is, left to left and right to right.
21