Specifications - Monacor IOC-2812DV Anleitung

IOC-2812DV
Order Number 18.9120
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS
4) Click the button "Modify". After successful transmission of the modifica-
tions, the message "Modified successfully" will appear below "Status".
Note: To change the settings, it is necessary to enter the correct log-in data of the
camera (user name, password).
5) For a new search, click the button "Search".
6 Calling up the Camera via Computer
To call up the user interface of the camera, enter its IP address in the address
bar of the program Windows Internet Explorer (IE, version 6 or higher). The
IP addresses of the computer and of the camera must be in the same subnet.
When the camera is called up, the log-in window will appear. Select the
language for the user interface. The description below refers to English. Then
enter the user name and the password (default setting for both: admin).
Individual log-in data can be defined later in the camera settings.
Important: To prevent unauthorized access, change at least the password. Always
make sure to remember the new password. You need the password to
reset the camera settings!
When the camera is called up from a computer for the first time, a request
to install an extension (plugin) for the IE will appear instead of the log-in
window. Click on download, save the installation file "IPC_Web_Plugin.exe"
to the computer, close the IE and execute the file. Then call up the camera
again via the IE. If necessary, reduce the security settings of the IE to be able
to use the installed ActiveX extensions.
When the connection to the camera has been established, the view with
the current camera image (fig. 3) will be displayed. The following options
are available:
a
View "Live" with display of camera image
b
View "Remote Setting" to change the camera settings
c
View "Local Setting" to define the storage locations for video record-
ings and snapshots on the computer
d
Button : When the mouse cursor is moved over this button, the cur-
i
rent user name and the software version numbers will be shown;
button to log out
e
Selection of a stream: Mainstream, Substream, Mobilestream
f
Selection of the aspect ratio for the camera image:
= original, = adapted
g
Button to insert the image settings: hue, brightness, contrast, satura-
tion and sharpness
h
Camera image with information inserted
Double-click the image to activate / deactivate the full-screen mode.
i
/ : Stop/Start of image transmission
j
Toolbar with the following functions:
: Zooming in image areas: drag the mouse to select the desired
image area
right mouse button ➾ entire image
: Start/Stop of a video recording on the computer
: Snapshot function to save a snapshot as an image file
To change the settings for the camera, select the tab
"Remote Setting" ( ☞ fig. 4). On the left (
for the settings. To set, for example, the current time for the camera, go to
"System  DateTime".
To save a setting that has been changed, click the button "Save". To load
the current settings from the camera, click the button "Refresh".
Windows is a registered trademark of Microsoft Corporation in the USA and other countries.
ELECTRONICS FOR SPECIALISTS
b
to go to the view
k
), select the desired category
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright by MONACOR INTERNATIONAL. All rights reserved.
©
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS
7 Adjusting the Focal Length and the Focus
To adjust the lens, use a small screwdriver: Turn the corresponding setscrew
on the front of the camera to adjust the focal length ZOOM (5) and the
sharpness FOCUS (4).

8 Specifications

Image sensor: . . . . . . . . . CMOS, 8:5 mm (1⁄3 ")
Lens: . . . . . . . . . . . . . . . . 1 : 1.2 / 2.8 – 12 mm
Viewing angle: . . . . . . . . 35° to 89°
Resolution: . . . . . . . . . . . 2048 × 1536 pixels max.
Electronic shutter: . . . . . . 1⁄5 – 1/20 000 s
Protocols: . . . . . . . . . . . . HTTP, HTTPS, TCP/IP, RTSP, DHCP, NTP, PPoE,
Compression: . . . . . . . . . MPEG-4 H.264, H.265, MJPEG
Video streaming: . . . . . . . Mainstream 256 – 8192 kbit /s
Network: . . . . . . . . . . . . Ethernet 10 / 100 Mbit/s
Ambient temperature: . . −10 °C to +50 °C
IP rating: . . . . . . . . . . . . . IP 66
Power supply: . . . . . . . . . ⎓ 12 V/1 A or PoE IEEE 802.3af
Dimensions: . . . . . . . . . . ⌀ 151 mm × 113 mm
Weight: . . . . . . . . . . . . . 600 g
e
h
i
k
ELECTRONICS FOR SPECIALISTS
ONVIF 2.60, etc.
Substream 128 – 4096 kbit /s
Mobilestream 8 – 1536 kbit /s
Subject to technical modification.
a b c
f
A-1902.99.01.04.2018
ELECTRONICS
d
g
j
➂
➃