Installation Hints - Hama M1120 Installationshinweise

g Installation hints
1. Hardware Installation
a) Switch on your computer and connect the USB plug
to a free USB port.
b) Window will detect and install the mouse.
c) To use the full range of functions your wireless
mouse offers, you must install the provided software
(for more information, see point 5).
2. DPI Switch
Briefl y press the DPI switch (fi g. 1) to toggle the
sensitivity between 800 and 1600 DPI
(M570: 500 and 1000 DPI). The higher the DPI number, the
more precise the scanning is and the quicker the cursor
will move in response to the same mouse movement.
3. Functions of the Additional Side Buttons
3.1 The following button functions are available in
standard mode (fi g. 1):
Next
page
Previous
page
4. 4-Way Scroll Wheel
The 4-way scroll wheel provides especially comfortable
navigation for vertical and horizontal scrolling.
Please note that scrolling is only possible if there is a
vertical or horizontal scroll bar.
In addition, the 4-way scroll wheel can be clicked and
used as a button.
5. Software Installation
• The software can be used with
Windows 2000/XP/Vista/7.
• Uninstall any mouse software that may already be
installed.
a) Insert the CD provided into your CD-ROM or
DVD-ROM drive.
Wait a few moments and the installation process will
start automatically. If the software does not open
automatically, you can open it manually by double
clicking the fi le "autorun.exe" on the CD-ROM.
b) Once the software has been successfully installed,
you can double-click the mouse icon
in the task bar to adjust the button settings according
to your personal preference.
Note:
If you are using Windows Vista or Windows 7,
installation will be interrupted by the User Access
Control message "An unidentifi ed program wants to
access your computer".
Click "Allow" to proceed with the installation.
4-way
scroll wheel
DPI switch
fi g. 1
3