Installation Hints - Hama M3030 Installationshinweise

g Installation hints
1. Hardware Installation
1.1 Inserting the battery
a) Remove the battery compartment cover and insert the
battery in the correct direction in the battery
compartment (fi g. 1).
receiver eject butoon
b) Reattach the battery cover so that it is securely closed.
1.2 Connecting the USB receiver
a) Connect the USB receiver to a free USB port on the PC.
b) Windows detects the USB receiver and installs it into the
operating system.
c) Thanks to Smart-Link technology, the standard functions
of the mouse can be used immediately.
d) The software supplied must be installed to assign
specifi c functions to the additional buttons on the side.
2. Battery control indicator (fi g. 2)
The control light starts to fl ash when the battery voltage is too
low. Although the mouse will still function for some time, you
should change the batteries as soon as possible.
Note: When you insert new batteries, the LED will fl ash ten times.
DPI switch
00052468bda.indd Abs2:3 00052468bda.indd Abs2:3
Downloaded from www.Manualslib.com
Battery control indicator
manuals search engine
3. DPI switch
Press the DPI switch (fi g. 2) to toggle between 800 and 1600 DPI.
4. 4-way scroll wheel
The 4-way scroll wheel is ideal for displaying large images,
documents or spreadsheets. However, you can only do this if the
horizontal or vertical scroll bars are present. To use all functions
of the mouse, in particular the 4-way scroll wheel, you must
install the software.
5. Installing the software
• The software supports Windows 2000/XP/Vista
• Uninstall any mouse software already installed.
a) Insert the enclosed CD into your CD-ROM or DVD-ROM drive.
Wait a moment, the installation windows opens
automatically. If this does not happen, click Start => Run,
enter "X:\autorun" and press Enter to confi rm.
b) Select "Wireless/Wired Mouse" as the product type and
then click "Run Setup".
fi g. 1
c) Double-click the mouse icon
button settings to your personal needs.
Note:
When installing the software under Windows XP/Vista, a
message may appear referring to an unsigned driver or program.
This does not affect mouse or software operation. Simply ignore
and continue with the installation.
6. Storing the receiver in the mouse (fi g. 3)
1. The receiver can be stored in the indentation on the under
side of the mouse when you are not using the mouse or to
improve portability.
2. If the receiver is fully inserted, the mouse switches off
automatically.
7. Functionality problems
If the mouse does not function as expected, ensure that you have
carried out the following steps:
• The battery is new and inserted correctly
• The receiver is correctly connected to the computer.
• Receiver and devices are within their communication range
fi g. 2
(depending on location, max. 10 m)
in the task bar to adjust the
fi g. 3
3
20.04.2007 10:50:39 Uhr 20.04.2007 10:50:39 Uhr