Yard Force PHCEG02A Original Bedienungsanleitung Seite 36

of moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If damaged, have
the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
7. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended
could result in a hazardous situation
Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional safety rules for electric high pruner
1. Keep all parts of the body away when the saw is operating.
Before starting the saw, ensure that the saw chain is not
touch anything. While working with a chain saw, one instant
of careless may result in clothing or body parts caught by
the saw chain.
2. The appliance is designed for two-handed operation.
Always hold the chain saw with your right hand at the rear
handle and your left hand on the front handle.
3. Keep the handles dry, clean and free from oil and grease.
Greasy and oily handles are slippery and cause loss of
control.
4. Never start the appliance before the chain bar, saw chain
34