MC Crypt CMP-920 Bedienungsanleitung Seite 34

6. Connections and control elements
(20) CD tray
Insert the CD to be played here.
(21) OPEN/CLOSE button
Press this button to open the CD tray (20).
If the CD player is in play mode, the CD tray (20) is locked.
(22) VINYL button
This button activates the scratch function.
When the scratch function is active (button is lit), use the jog wheel (2) to produce the scratching effect of a record
player.
(23) Control connection
This connection connects the drive unit to the control unit.
(24) Mains connection AC IN
Plug in the provided mains cable here.
(25) Audio OUTPUTs
The left and the right audio output signals of the CD player are supplied on these RCA sockets.
OUTPUT 1 supplies the signal of Player 1, OUTPUT 2 supplies the signal of Player 2.
Connect the audio inputs of your mixing desk or amplifier here.
34