Renkforce 1052376 Bedienungsanleitung Seite 3

G Operating Instructions
Digital snorkelling wristwatch
Item no. 1052376
Intended use
The wristwatch is used to display the time and the calendar data as well as the time of a second
time zone. Furthermore, the product features an alarm function, stopwatch, count-down timer as
well as a measuring function for diving depth, including the recording of diving depth, temperature
and diving time.
The watch may only be powered by a battery (for the type, refer to "Technical data").
Any use other than that described above could lead to damage to this product and involves the risk
of short circuits, fire, electric shock, etc.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All names of com-
panies and products are the trademarks of the respective owners. All rights reserved.
Contents
• Wristwatch
• Operating instructions
Explanation of the symbols
This symbol indicates specific risks associated with handling, function and use.
The "arrow" symbol indicates special tips and operating information.
Safety Instructions
F irst, read the complete operating manual carefully, as it contains important informa-
tion about the proper operation.
T he warranty will be void in the event of damage caused by failure to observe these
safety instructions! We do not assume any liability for any resulting damage!
W e shall not accept liability for damage to property or personal injury caused by
incorrect handling or non-compliance with the safety instructions! The warranty will
be void in such cases!
• For safety reasons, any unauthorised conversion and/or modification to the product
is not permitted.
• Do not expose the product to high temperatures, strong vibrations or heavy mechani-
cal loads.
• If you have any doubts about the correct operation, or the safety of the product,
please consult a specialist.
• This product is not a toy and must be kept out of the reach of children.
• Do not leave packaging materials unattended. It may become a dangerous plaything
for children.
• Handle the product with care, it can be damaged by impacts, blows, or accidental
drops, even from a low height.
• Also observe any further safety instructions in the individual sections of this operat-
ing guide.
Features
• Measuring the diving depth with recording of diving depth/temperature/diving time
• Stop-watch
• Countdown timer
• Display of a second time zone
• Calendar function
• Alarm function with 5 alarm times and hour signal
• Clock face light
Controls and Parts
(1) RESET button
(2) MODE key
(3) ST/STP key
(4) LIGHT key
Selecting the operating mode
• With the MODE (2) key you can select the operating mode of the wristwatch.
• Press the MODE (2) key repeatedly until the operating mode is displayed:
Time/date divingdepth(DEP)
Countdown timer (TMR)
Operating Modes
If you press and hold the ST/STP (3) key or the LIGHT key (4) during the settings, the
value to be set will be changed continuously.
a) Time display
Display format
• Press the ST/STP (3) key to define the display format of the time (12h or 24h format).
Setting the time of day
• Press the RESET (1) key, until the second display flashes.
• Press the ST/STP (3) or the LIGHT (4) key to reset the second display to "00".
• Press the MODE key (2) to switch to the next setting step (hours).
• Increase the value of the hour display using the ST/STP (3) key or decrease it with the LIGHT (4)
key.
• Set the other values (minutes, year, month and date) as described above. Hereby, the MODE (2)
key selects the value to be set and the ST/STP (3) or the LIGHT (4) key changes the value to be
set.
• After completion of the time setting press the RESET (1) key to save the settings.
b) Diving depth
Setting the display unit
• Press and hold the RESET (1) key until the display of the measuring unit for the diving depth
flashes.
• Press the ST/STP (3) or the LIGHT (4) key to select the desired measuring unit (m or ft).
• Press and hold the MODE (2) key until the display of the measuring unit for the temperature
flashes.
• Press the ST/STP (3) or the LIGHT (4) key to select the desired measuring unit (°C or °F).
• Press the RESET key (1) to save the settings.
Measuring the diving depth
• Press the ST/STP (3) key to start the measurement. The measured temperature is displayed.
• Press the ST/STP (3) key to stop the measurement.
• The measurement of the diving depth starts automatically when a diving depth of more than 1.5 m
(5 ft) is measured.
• If the diving time exceeds one minute, the measured values are recorded automatically.
• If the diving speed is more than 6 m/s, an alarm signal is emitted and the diving depth display
flashes.
c) Recording
• By default, this function displays the recorded deepest diving depth and the corresponding date.
• Press the RESET (1) key to select the different recordings by date or diving depth.
• Press the LIGHT (4) key to retrieve the different measured data (diving depth, temperature and
diving duration) of these recordings.
• Press and hold the ST/STP (3) key for two seconds, to delete the selected recording.
1
2
recording (REC)
alarm (ALM) time second time zone (DTM)
3
4
stop watch (STW)