Werbung
Verfügbare Sprachen
Verfügbare Sprachen
G Operating instructions
Radio alarm clock analogue/digital
Item no. 1007800
Intended use
The product displays the time of day and the date; furthermore an alarm function is integrated.
The time is set automatically using an integrated DCF receiver.
Any use other than that described above could lead to damage to this product and involves the risk
of short circuits, fire, electric shock, etc.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All names of com-
panies and products are the trademarks of the respective owners. All rights reserved.
Contents
• Radio controlled alarm clock
• Operating instruction
Explanation of the symbols
This symbol indicates specific risks associated with handling, function and use.
The "arrow" symbol indicates special tips and operating information.
Safety Instructions
First, read the complete operating manual carefully, as it contains important informa-
tion about the proper operation.
The warranty will be void in the event of damage caused by failure to observe these
safety instructions! We do not assume any liability for any resulting damage!
We shall not accept liability for damage to property or personal injury caused by
incorrect handling or non-compliance with the safety instructions! The warranty will
be void in such cases!
• For safety reasons, any unauthorised conversion and/or modification to the product
is not permitted.
• Do not expose the product to high temperatures, humidity, strong vibrations or heavy
mechanical loads.
• Please consult a specialist if you have any doubts regarding the use or safety of the
product.
• This product is not a toy and must be kept out of the reach of children. Use the
product only out of the reach of children; the product contains parts that can be
swallowed as well as batteries.
• Do not leave packaging materials unattended. It may become a dangerous plaything
for children.
• Handle the product with care, it can be damaged by impacts, blows, or accidental
drops, even from a low height.
• Please observe the additional safety instructions in the individual chapters of this
manual.
Notes on Batteries and Rechargeable Batteries
• Batteries/rechargeable batteries must be kept out of the reach of children.
• Do not leave batteries/rechargeable batteries lying around; there is a risk that they
could be swallowed by children or pets. If they are swallowed, consult a doctor im-
mediately.
• Leaking or damaged batteries/rechargeable batteries may cause acid burns when
coming into contact with skin, therefore use suitable protective gloves.
• Normal/rechargeable batteries must not be short-circuited, opened or thrown into a
fire. There is a risk of explosion!
• Do not recharge normal, non-rechargeable batteries, due to risk of explosion! Only
charge rechargeable batteries that are intended for this purpose; use a suitable bat-
tery charger.
• Check that the polarity is correct when inserting the battery/rechargeable battery
(pay attention to plus/+ and minus/-).
Features
• Clock mechanism without second hand, to avoid ticking noises
• LC-display inclusive weekday display in different languages
• Snooze function (repeated alarm)
• Switchable 12/24h-display
• Clock face light
• Time Zone Setting
• Additional IR sensor to increase the display accuracy
Controls and Parts
1
2
3
(1) SNOOZE button
(2) LC-display
(3) IR sensor
(4) Multifunctional button
Inserting/Replacing the Battery/Rechargeable Battery
• Open the battery compartment (6) on the rear of the case and insert two batteries of type AAA/
Micro with the correct polarity.
• The correct polarity is indicated in the battery compartment (6).
• After inserting the batteries, the LC-display (2) starts to flash and you can set the time zone and
the display language (see section "Initial start-up").
• Next, the radio alarm clock attempts to receive the DCF signal (see section: "DCF Reception").
• Close the battery compartment (6) again.
• Replacing the batteries is necessary when the battery warning symbol appears on the LC-dis-
play (2).
The use of rechargeable batteries is possible. However, the lower operating voltage
(rechargeable battery = 1.2 V, battery 1.5 V) and lower capacity will reduce the operat-
ing time.
If there is no proper indication on the LC-display (2), press the RESET button (7) to acti-
vate the reset function. The internal processor thereby is reset and is able to function
correctly again.
Initial Start Up
• After inserting the batteries the indication "01" flashes on the display. This indicates the Central
European Time zone (CET).
• Set the desired time zone by turning the multifunctional button (4).
• Press the ZONE button (5) to confirm.
• Afterwards, also set the desired display language for the weekday display by turning the multi-
functional button (4).
• Press the ZONE button (5) again to confirm.
If no keystroke is performed for ten seconds during the initial start-up, the radio alarm
clock exits this setting and then starts the DCF reception.
ZONE
4
5
6
(5) ZONE button
(6) Battery compartment
(7) RESET button
RESET
7
Werbung
