Monitor Power Connection; Monitor Controls - Eufab 16227 Bedienungsanleitung

windshield or dashboard.
3. Press the lock down to attach and fix the mount to the surface.
4. Snap in the monitor to the suction mount.
5. Adjust the mounting arms to suit your view angle to the monitor and tighten the
screws on the mount to fix the position.
To maximize the effectiveness of the suction mount, it is recommended that the
application be performed under the following conditions:
Surface temperature should be between 21 c and 38 c (70 c and 100 c).
•
Application below 10 c (50 c) should be avoided.
•
Application should not occur in direct sunlight.
•
Mounting should be protected from exposure to direct sunlight for a period of 24 hours.
NOTE: UNDER EXTREME BRIGHT LIGHT CONDITIONS, THE SCREEN IMAGE MAY TAKE A
FEW SECONDS TO STABLIZE. PLEASE WAIT UNTIL THE IMAGE HAS STABLIZED BEFORE
BACKING UP.

MONITOR POWER CONNECTION

Use a 12 Volt cigarette lighter adaptor plugged into the vehicle's cigarette lighter socket.
Power Cable with 12 Volt Cigarette Lighter Adaptor
1. Insert the small 12 Volt DC plug of the power cable into the right side of the monitor.
2. Plug the 12 Volt cigarette lighter adaptor into the vehicle's cigarette lighter socket.
3. Press the ON/OFF button to turn the monitor ON.

MONITOR CONTROLS

8