English; Before Use; Setting The Speed - Braun MultiQuick 5 Vario MQ 5045 Bedienungsanleitung

English

Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy your new Braun
appliance.

Before use

Please read the use instructions carefully and
completely before using the appliance.
Caution
•
The blades are very sharp! To
avoid injuries, please handle
blades with utmost care.
• Care shall be taken when handling
the sharp cutting blades, emptying
the bowl and during cleaning.
• This appliance can be used by per-
sons with reduced physical, sensory
or mental capabilities or lack of expe-
rience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and if they understand the
hazards involved.
• Children shall not play with the appli-
ance.
• This appliance shall not be used by
children.
• Children shall be kept away from the
appliance and its mains cord.
• Always unplug or switch off the appli-
ance when it is left unattended and
before assembling, disassembling,
cleaning and storing.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Before plugging into a socket, check
whether your voltage corresponds
with the voltage printed on the bot-
tom of the appliance.
• This appliance is designed for
household use only and for proces-
sing normal household quantities.
• Do not reach into the filling shaft
when the appliance is plugged in,
especially while the motor is running.
Always use the pusher to guide food
through the shaft.
• Do not use any part in the microwave.
• Please clean all parts before first use
or as required, following the instruc-
tions in the Care and Cleaning sec-
tion.
Description
1 Variable speed regulator
2 Variable speed button (on/off)
3 Turbo button (T)
4 Motor part
5 Release buttons
6 Blender shaft
7a Whisk gearbox
7b Whisk
8 Beaker
9 350 ml chopper «hc»
a Lid
b Blade
c Bowl
d Anti-slip ring
10 500 ml chopper «ca»
a Lid
b Blade
c Bowl
d Anti-slip ring
11 1250 ml chopper «bc»
a Lid
b Blade
c Ice blade
d Bowl
e Anti-slip ring
Unpacking
Take the unit out of the carton. Remove all pieces of
the packing. Remove any possibly extant labels on
the unit (do not remove the rating plate).

Setting the speed

When activating the variable speed button (2), the
processing speed corresponds to the setting of the
variable speed regulator. The higher the setting, the
faster the chopping results. You can adjust the
speed conveniently during operation by turning the
speed regulator using your thumb or index finger.
Maximum processing speed is achieved by
pressing the turbo button (3). You may also use the
9