Bosch Indego 350 l Betriebsanleitung Seite 29

Settings Sub-menu 1
Security
Settings
Date & Time
Set Language
Info
Advanced
Tools
* Only Indego 350/400 (available via the app for Connect models)
Bosch Power Tools
Sub-menu 2 Explanation
Auto Lock If buttons are not pressed for 3 min. they will be automatically
locked.
Recommended for safety reasons and protection against theft.
On PIN code is required for reactivation after auto-lock and safety
shut-down.
Off Buttons are always ready for input
Change PIN Changing of a PIN code needs entering of existing PIN code first
Alarm
On Alarm is activated
Off Alarm is deactivated and it will not sound
Change time and date
Change display language
System Status Information on Connectivity signal strength, battery charge, sys-
tem information and operating and charging time for the mower
Wire ID Change wire ID when possible interference nearby
Sensor setting/ Select between Low (uneven ground), Normal and High (slippery
Lawn condition ground) sensitivity. Mower bump sensor will become more or less
sensitive depending on lawn condition selected.
Remap It will delete the current map
Factory Reset Reset of the machine to factory setting will delete all personal set-
tings (not PIN).
After a factory reset the mower will need to map the garden
Level check Information about the ground angle of the mower. When mower in
dock, if dot out of radar then position in a different flat location
Wire Signal Detects the signal received from the perimeter wire
Mower will not have any wire signal while in the docking station.
English | 29
F 016 L81 767 | (29.11.17)