Bosch Indego 350 l Betriebsanleitung Seite 24

24 | English
Battery Hazards
 Recharge only in the Bosch approved
docking station.
 The Indego will operate between 5 °C
and 45 °C. If the battery temperature
is outside this range the Indego will
display a message and will not leave
the docking station. If operating it will
return to the docking station or stay
on place.
 In the unlikely event of liquid being
ejected from the battery avoid all
contact with the machine. If contact
with the liquid occurs, seek medical
advise.

If the battery becomes defective, liq-
uid can escape and come into contact
with adjacent components. Check
any parts concerned and contact the
Bosch Service Centre.

Do not open the machine or bat-
tery. Danger of short circuit and elec-
tric shock.
 Protect the machine against fire.
Danger of battery explosion. In case
of fire or battery explosion contact
the emergency services.
 In case of damage and improper
use of the machine, vapours may
be emitted from the battery. Pro-
vide for fresh air and seek medical
help in case of complaints. The va-
pours can irritate the respiratory sys-
tem.
Safety Warnings for Docking Station
and Power Supply
 Only use the official Bosch docking
station and power supply to charge
F 016 L81 767 | (29.11.17)
the mower. Otherwise there is dan-
ger of fire and explosion.
 Check the docking station, power
supply, cables and plugs periodi-
cally. If damage or aging is detect-
ed, isolate from the mains and do
not use the docking station or pow-
er supply. Never open the docking
station or power supply. Have re-
pairs performed only by a qualified
Bosch technician and only using
original spare parts. A damaged
docking station, power supply, cable
or plug increases the risk of an elec-
tric shock.
 Do not operate the docking station
and power supply on easily flam-
mable surfaces (e. g., paper, tex-
tiles, etc.) or surroundings. The
heating of the docking station and
power supply during the charging
process can pose a fire hazard.

Supervise children at all times. This
will ensure that children do not play
with the docking station, power sup-
ply or the machine.

The voltage indicated on the power
supply must correspond to the volt-
age of the power source.
 We recommend that the power sup-
ply is only connected into a socket
which is protected by a circuit-break-
er that would be actuated by a 30 mA
residual current. Check your RCD at
regular intervals.

The supply cord must be inspected
for signs of damage at regular inter-
vals.
Bosch Power Tools