Boot Option Priorities; Boot Override; Tool Menu; Setup Animator - Asus PRIME Z370-A Serie Bedienungsanleitung

Boot Option Priorities

These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
• To access Windows
supported).
• To select the boot device during system startup, press <F8> when the ASUS Logo
appears.

Boot Override

These items displays the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.
3.9

Tool menu

The Tool menu items allow you to configure options for special functions. Select an item then
press <Enter> to display the submenu.

Setup Animator

This item allows you to enable or disable the Setup animator.
Configuration options: [Disabled] [Enabled]
3.9.1

ASUS EZ Flash 3 Utility

This item allows you to run ASUS EZ Flash 3. When you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No], then press
<Enter> to confirm your choice.
For more details, refer to section 3.11.2 ASUS EZ Flash 3.
ASUS PRIME Z370-A Series
®
OS in Safe Mode, press <F8> after POST (Windows
®
8 not
3-23