Pch-Fw Configuration; Thunderbolt(Tm) Configuration - Asus PRIME Z370-A Serie Bedienungsanleitung

SMART Self Test
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks.
Configuration options: [On] [Off]
SATA6G_1(Charcoal Black) - SATA6G_6(Charcoal Black)
SATA6G_1(Charcoal Black) - SATA6G_6(Charcoal Black)
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode Selection is set to [AHCI] and allows
you to enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.6.6

PCH-FW Configuration

This item allows you to configure the firmware TPM.
3.6.7

Thunderbolt(TM) Configuration

The items in this menu allow you to configure Thunderbolt settings.
Thunderbolt(TM) Support
This item allows you to disable or enable ThunderBolt Support.
Configuration options: [Fully Disabled] [Disabled] [Enabled]
ThunderBolt (TM) PCIe Support
This item allows you to disable or enable ThunderBolt PCIe Support.
Configuration options: [Disabled] [Enabled]
3-18
Chapter 3: BIOS Setup