Onboard Leds - Asus PRIME Z370-A Serie Bedienungsanleitung

1.1.8

Onboard LEDs

1. POST State LEDs
The POST State LEDs provide the status of these key components during POST
(Power-On Self-Test): CPU, memory modules, VGA card, and hard disk drives. If an
error is found, the critical component's LED stays lit up until the problem is solved.
The order which the LEDs light up may vary per CPU.
The POST State LEDs provide the most probable cause of an error code as a starting point
for troubleshooting. The actual cause may vary from case to case.
2. Standby Power LED
The motherboard comes with a standby power LED. The LED lights up to indicate that
the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
ASUS PRIME Z370-A Series
1-13