Frost Protection; Transport; Storage; Care And Maintenance - Kärcher HD 8/23 G Bedienungsanleitung

Frost protection

ATTENTION
Frost will destroy the not completely water
drained device.
Store the appliance in a frost free area.
If you cannot store it in a frost-free
place:
 Drain water.
 Pump in conventional frost protection
agents through the appliance.
Note:
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the anti-
freeze agent manufacturer.
 Operate device for max. 1 minute until
the pump and conduits are empty.

Transport

ATTENTION
Protect the trigger from damage during
transport.
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
 Insert the hand-spray gun in the holder.
 Reel the high-pressure hose onto the
hose holder.
 Push the push handle down and pull
our push the appliance using the push
handle.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
This appliance must only be stored in inte-
rior rooms.
18

Storage

Care and maintenance

You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Note: The maintenance plan given below
only lists the maintenance tasks for the
high-pressure pump. The maintenance
tasks for the engine must also be done ac-
cording to the details given in the operating
instructions manual of the engine manufac-
turer.
DANGER
Risk of injury if the machine is left running
in an unattended state.
Switch off the motor and remove the spark
plug connector prior to performing any work
on the appliance.
Risk of burns! Do not touch hot mufflers,
cylinders or radiator ribs.

Maintenance intervals

Daily
 Check the high pressure hose for dam-
ages (risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure
hose.
Weekly
 Check oil level Please contact Custom-
er Service immediately if the oil is milky
(water in oil).
 Clean water filter.
Every 500 operating hours, at least
annually
 Have the maintenance of the device
performed by the customer service.
 Change the oil in the high pressure
pump.
– 6
EN