Call Saved Measured Data; Delete Stored Measured Data - VOLTCRAFT VPT-100 Bedienungsanleitung

17. CaLL SaVed meaSured data

To call saved data records in the corresponding operating mode (P = pressure, V = flow speed, F = volume flow), push the button
"P/V/F".
Push and hold the "Avg/Rec" button for 2 seconds to display saved data records. The last data record saved appears in the display
first.
Push the buttons "Unit " or "Unit
Push "Avg/Rec" to have the average value of all saved measured values displayed in the selected operating mode.
To leave the saving mode again, keep "Avg/Rec" pushed for 2 seconds again.
18. deLete Stored meaSured VaLueS
To delete individual saved data records in the corresponding operating mode (P = pressure, V = flow speed, F = volume flow), push
the button "P/V/F".
Push and hold the "Avg/Rec" button for 2 seconds to display saved data records. The last data record saved appears on the display
first.
Push the buttons "Unit " or "Unit
Push "SAVE/CLEAR" to delete the selected data record. This reduces the displayed number of saved data records at the bottom
right of the display.
To leave the saving mode again, keep "Avg/Rec" pushed again for 2 seconds.
To delete all data records, proceed as described in chapter 9 "Change Setup Setting" item 9.9 "delete memory".
", to browse the saved data records.
", to browse the saved data and select the desired data record.
33