Configure Measuring Settings; Delete Memory - VOLTCRAFT VPT-100 Bedienungsanleitung

9.8 Configure measuring Settings

Use the buttons "Unit " or "Unit
Push "Avg/Rec" to conform your selection. The display shows either "1", "2" or "3":
1: The display shows pressure and flow velocity
2: The display shows flow velocity and volume flow
3: The display shows pressure, flow velocity and volume flow
Select the button "Unit " or "Unit

9.9 delete memory

Use the buttons "Unit " or "Unit
Push "Avg/Rec" to conform your selection.
Push "Save/Clear" to switch between the following four deletion options:
PRESS VEL FLOW: Deletes all saved pressures, flow velocities and volume flows
PRESS: Deletes all saved pressure data
VEL: Deletes all saved flow velocity data
FLOW: Deletes all saved volume flow data
To delete, use the buttons "Unit
Confirm your selection by pressing "Avg/Rec.".
" in setup mode to scroll to the menu item "type".
" to display the desired option "1", "2" or "3" and confirm your selection by pushing "Avg/Rec".
" in setup mode to scroll to the menu item "ALL".
" or "Unit " to switch between the options "YES" (delete) and "no" (do not delete).
29