Change Setup Settings; Setup Options; Calling And Terminating The Setup Menu; Changing A Setting In The Setup - VOLTCRAFT VPT-100 Bedienungsanleitung

9. Change SetuP SettIngS

In the setup, you can define, e.g., the shape of the flow channel and the associated parameters. Further settings refer to the auto
power off function and the settings for MAX, MIN and AVG. You can also delete saved data via the setup.

9.1 Setup options

option
Measuring units for channel dimensions
Channel shape and parameters
Auto-Power-off
(Automatic Deactivation)
Menu setting
Delete Memory

9.2 Calling and terminating the Setup menu

Push the button "SETUP" for 2 seconds to call or terminate the setup menu. If the setup mode is active, the word "SETUP" appears
in the lower area of the display.

9.3 Changing a Setting in the Setup

Push "Unit " or "Unit ", to scroll to the setup option that you want to change.
Push "Avg/Rec" to confirm your selection.
Push "Unit " or "Unit " repeatedly until the desired value for your setting is displayed.
Push "Avg/Rec" to confirm your selection and save the new settings.
The setup can be called in mode "MAX MIN/AVG".

9.4 Selecting the measuring unit for the flow Channel

In setup mode, push "Unit
Push "Avg/Rec" to confirm your selection.
Select the measuring unit "in" (inch) or "cm" by pushing "Unit
Push "Avg/Rec" to confirm and save your selection.
26
menu Item
Unit
Duct Shape
SLEEP
ENU
Mem clear
" or "Unit ", until "unit" appears in the display.
Settings
inch/cm
Specified area for flow measurements
Auto off/on
1, 2, 3
Yes/No
" or "Unit " until the desired setting appears in the display.