PicoScope 3000 series
29
Code Enumeration
0
PS3000_OK
1
PS3000_MAX_UNITS_OPENED Attempts have been made to open more than
2
PS3000_MEM_FAIL
3
PS3000_NOT_FOUND
4
PS3000_FW_FAIL
5
PS3000_NOT_RESPONDING
6
PS3000_CONFIG_FAIL
7
PS3000_OS_NOT_SUPPORTED Need to use Windows 98 (or later) or
Description
The oscilloscope is functioning correctly.
PS3000_MAX_UNITS.
Not enough memory could be allocated on the
host machine.
An oscilloscope could not be found.
Unable to download firmware.
The oscilloscope is not responding to
commands from the PC.
The configuration information in the
oscilloscope has become corrupt or is
missing.
Windows 2000 (or later)
Copyright 2005 Pico Technology Limited. All rights reserved.