6.
Software update
You can check your Landroid
software can be updated when new versions become available. The latest software can be downloaded from our website
www.worxlandroid.com. See below for download and installation instructions:
Step 1: Locate the latest software version at: www.worxlandroid.com. Copy the " .pck" file containing the latest software
version to a USB memory stick.
NOTE: Before transferring the " .pck" file make sure the memory stick does not contain other files or data.
Step 2: Press the ON/OFF button (19) to turn off your Landroid
the USB memory stick (See Fig. I2). You can take out the battery pack (See Fig. I3) if you think it is difficult to align the USB
memory stick with the USB port, but you need to fit the battery pack back after the USB memory stick is inserted.
Step 3: Press the ON/OFF button (19) to turn on the Landroid
and will be displayed in the bottom right corner of the interface for 10 seconds. (See Fig. I4)
Step 4: Remove the memory stick and refit the battery cover.
The manual in box is based on the default software in the mass production. Some new features/functions in the new
version may not exist in the manual. If you found some settings not in the manual, please visit www.worxlandroid.com to
download the latest manual.
I1
12
I3
7.
Maintenance
®
Your Landroid
M needs to be checked from time to time. The Landroid
as well as having some parts replaced, as they can become worn.
In the following we want to let you know how to take care of your Landroid
7.1 Keep it sharp
WARNING: Before cleaning, adjusting, or replacing the Blades, turn your Landroid
put on protective gloves.
Lawn Mowing Robot
®
M's software version when you turn on the machine by pressing the ON/OFF button. The
®
M. Open the cover at the bottom (See Fig. I1) and insert
®
M. The new software version will be updated automatically,
I2
I4
®
M works hard and after time needs a good cleaning
®
M.
®
M OFF and
EN