How Does My Landroid; Finding The Charging Base; Rain Sensors; Sensing The Boundary Wire - Worx LANDROID M Bedienungsanleitung

3.2 How does my Landroid

know where to go?
®
Your Landroid M is capable of doing things on its own. The
®
Landroid M knows when it needs to go to its Charging Base (4)
to charge, can sense when it is raining, can stop itself if it senses
a problem, and knows to stop, draw back, and then turn around
when it bumps into something blocking its path or other object. The
®
Landroid M will also automatically stop its Blade Turning Disc (13)
from rotating if it is lifted off the ground to prevent an accident.
A. Finding the charging base
®
When your Landroid M needs to recharge, it will stop mowing and
follow the Boundary Wire (21) in an anti-clockwise direction back
to its Charging Base. Landroid
grass near the boundary wire once a week. If you want to mow the
grass near the boundary wire at other times, open the panel cover,
press the home button and close the panel cover. Landroid
stop mowing, locate the boundary wire and mow the grass near the
boundary wire while it locates the charging station . We suggest you
use this function when the battery power is more than 75%. You can
check the battery power in the display.
B. Rain sensors
®
The Landroid M is fitted with a Rain Sensor (9) that will detect
rain drops and tell the Landroid
Boundary Wire back to its Charging Base (See Fig. B )
®
The Landroid M is programmable to have a delay start function
when it rains. The default delay time set in Landroid
When the rain sensors are wet, the Landroid
station. Only when the rain sensors become dry will the Landroid
begin the delay start countdown or return to mowing immediately. See the Programming and Troubleshooting Guide for
more details.
C. Sensing the boundary wire
®
The Landroid M always obeys the border set by the Boundary Wire and uses two sensors at its front to sense when it is
getting close(See Fig. C).
D. Starting and stopping while mowing (See Fig. D,E)
If you would like to command the Landroid
To start mowing, open the Control Panel Cover, press the ON/OFF key and input the PIN code, then press start key and
close the panel cover.
D D
Lawn Mowing Robot
®
M
®
M is pre-programmed to mow the
®
M to stop mowing and follow the
®
M is 180mins.
®
M returns to its docking
®
M to stop mowing, then simply press the STOP button (8) on top of the mower.
B
®
M will
C
®
M
E
9
EN