Before Starting The Equipment; Maintenance And Cleaning - EINHELL DSL 250/2 Originalbetriebsanleitung

The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Air quality
cleaned and oiled
Air supply
via conditioning unit with fi lter pressure reducer
and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor rating of
2.2 kW
Work settings
6 bar working pressure set at the pressure redu-
cer or fi lter pressure reducer
Please note:
When working with the pin grinder, be sure to
wear the necessary protective clothing. Ob-
serve the safety regulations.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
GB

5. Before starting the equipment

Screw the supplied plug-in nipple into the air
connection after you have wound 2 to 3 layers
of sealing tape around the thread. Insert adapter
sleeve size Ø 3 mm or Ø 6 mm depending on
which grinding pin you want to use. To do so, un-
screw the lock nut, insert the adapter sleeve and
re-tighten the lock nut by hand. Then insert the
correct grinding pin (make sure it has the correct
shaft diameter!) and tighten the lock nut with the
two chuck keys, using the one key to hold the ad-
apter sleeve mount.

6. Maintenance and cleaning

Observance of the following maintenance inst-
ructions will ensure that this quality tool gives you
years of troublefree service.
Regular lubrication is vital for the long-term, relia-
ble operation of your pin grinder. Use only special
tool oil for this purpose.
You can choose from the following options for
lubricating the tool:
6.1 By mist oiler
A complete conditioning unit includes a mist oiler
and is fi tted to the compressor.
6.2 By hand
Each time before you use your impactscrewdriver,
feed 3-5 drops of special tool oil into the air con-
nection. If the pneumatic tool has not been used
for several days, you must feed 5-10 drops of oil
into the air connection before you switch on. Keep
your pneumatic tool in dry rooms only.
7. The warranty does not cover:
•
Wearing parts
•
Damage caused by an unacceptable level of
working pressure.
•
Damage caused by unconditioned com-
pressed air.
•
Damage caused by improper use or unautho-
rized tampering.
- 14 -