Controls - Qwic Compact FN7 Bedienungsanleitung

MPH
KM/H
RANGE BATTERY
MPH
KM/H
RANGE BATTERY
ERROR
SET
ANGE BATTERY MODE RPM
MENU
RANGE BATTERY MODE RPM TRIP TIME ODO MAX
SET
BATTERY MODE RPM TRIP
-
LEVEL RANGE BATTERY MODE RPM TRIP TIME ODO MAX
-
RANGE BATTERY MODE RPM TRIP TIME ODO MAX
LEVEL
MODE RPM TRIP TIME
-
MENU
ERROR
LEVEL
E RPM TRIP TIME ODO
MENU
ERROR
NGE BATTERY MODE RPM TRIP TIME ODO MAX
LEVEL
M TRIP TIME ODO MAX
MENU
ERROR
TERY MODE RPM TRIP TIME ODO MAX
P TIME ODO MAX
MI
KM
DE RPM TRIP TIME ODO MAX
VEL
ENU
ROR
MI
KM
TRIP TIME ODO MAX
Ah
VWh
MPH
MI
KM/H
KM
Range (kilometers or miles)
MODE RPM TRIP
Estimation of remaining distance to travel
Battery percentage
MODE RPM TRIP TIME
Indicates the remaining battery-capacity
RANGE BATTERY MODE RPM TRIP TIME ODO MAX
Driving-mode
TRIP TIME ODO MAX
Indicator of chosen driving-mode
RPM gauge and gear assistance
TIME ODO MAX
Indicates the rotations per minute (RPM) of
the bottom bracket. If the RPM is either too
low or too high, the advice to change gears
LEVEL
MENU
appears on screen. ERROR
MI
KM
Trip distance
ODO MAX
Distance travelled since last reset
MI
KM
Ah
Timer
VWh
MAX
MPH
Effective time travelled since last start-up
KM/H
Ah
Total distance
VWh
MPH
Total distance travelled by bicycle (Odometer)
MI
KM/H
KM
Maximum speed
Indicates the maximum speed driven since the
last reset.
Ah
VWh
MPH
KM/H

Controls

TIME ODO MAX
Switching On and Off
Press the 'ON/OFF' button for 2 seconds to turn the
ODO MAX
system on and off. The control panel can only be used
when the battery is connected to the bike. When the
display is turned off while riding the bike, or when
riding without battery, it is possible that random
MI
KM
values are displayed as the motor generates small
powerstreams. Everything that appears on the display
when the system is not activated, can be ignored. If the
MI
KM
system is not used for 5 minutes it will shut itself down.
Ah
VWh
MPH
Selecting menus
KM/H
Press shortly on 'SET' to choose between the total
Ah
distance, the trip distance, the range (kilometers or
VWh
MPH
miles), the range (minutes) and the timer.
KM/H
Adjusting the pedal assistance
Use the 'PLUS' and 'MINUS' buttons to select the
assistance programs (0 - 8). Power level 8 gives the
strongest assistance. In power level 0 the motor gives
no assistance but you can use the display of the bike.
Please note that the battery runs out of power faster
when using a high power level than with a low power
level. Levels 1-5 are appropriate for flat roads, levels 6-8
are very powerful and only meant for hills, slopes and
tough circumstances.
Display & Controls: Rearmotor and frontmotor models
43