Qwic Compact FN7 Bedienungsanleitung Seite 49

Display settings
If you press ' ' 2 times quickly after each other, the
settings menu appears. U can scroll through the settings
by pressing ' ' a single time.
Setting options in the setting menu:
Km/mile
After pressing ' ' a single time in the settings
menu, 'S7' appears. With '
between; KPH (kilometer per hour) or in MPH (miles
per hour).
Light sensitivity
Your bike is fitted with a light sensor. This sensor can
automatically turn on your lights. After pressing '
two times in the settings menu, 'bL0' appears. With
' ' / ' ' you can increase or decrease the light
sensitivity. You lighting can automatically switch on at
sunset or at dusk depending on the sensitivity.
Background lighting
You can adjust the background lighting brightness at
the 'bL1' menu. With ' ' / '
brightness, level 1, or a high brightness, level 5.
' / ' ' you can switch
'
' you can chose a low
Display & Control; Midmotor models
Error codes
Your bike is fitted with a self diagnostic function. If
' ' appears a number appears aswell in the 'speed'
window
'03'; Brake signal failure. Check if the brake is not
applied when this error code occurs.
'06'; Low voltage of the battery. Please check if the
battery is not empty.
'21'; Speedsensor failure. Check if the magnet mounted
in the rear will is positioned correctly when passing the
speedsensor.
It is possible that other problems occur. In that case,
be in contact with your dealer soon so that a potential
repair can be executed fast.
49