LG KB620 Benutzerhandbuch Seite 334

Settings
Security
PIN code request
When this is set to On, you are requested
to enter your PIN each time you switch the
phone on.

B620_Open _E_0814_쪼.indd
(Menu #.3.1)
Note
Press the right soft key in the PIN
v
code entry window to return to the
previous step.
3 incorrect PIN code entries would
v
invalidate the PIN code. And you
have to enter the PUK (PIN Unblock
Key) code to configure the PIN code
again.
The maximum number of times you
v
may enter the PUK code is 10. (Note:
If you enter an incorrect PUK code 10
times, the SIM card will be blocked
and must be replaced.)
If the PIN code request cannot be
v
disabled by operator settings, you
will not be able to choose this menu
item.
68
Handset lock
Menu #.3
You can lock your phone. The following 4 lock
functions are available.
When switch on: Locks the handset
whenever the handset is switched on.
When SIM change: Locks the handset
when the phone's SIM card has been
changed.
Immediatly: Locks the handset immediately.
None: Deactivates the lock function.
You are requested to enter the security code to
confirm the selection.
To unlock the handset, you need to enter
v
the security code.
Change codes
You can change the PIN, PIN2, and the
Security code.
PIN code
PIN is the abbreviation for Personal
Identification Number, and is used to restrict
use by an unauthorised user.
(Menu #.3.2)
(Menu #.3.3)
2008.8.19 10:50:3