Sony KLV-17HR1 Bedienungsanleitung Seite 8

Getting Started (continued)
Connect the AC cable
To connect the TV to the mains, use the supplied AC power adapter and AC cable.
To mains
AC cable
(supplied)
To put the cables in the stand
You can put the aerial cable, AC power adapter cable and Scart cable in the stand.
To adjust the TV angle
You can adjust the angle of the TV for
easy viewing.
Step 3
Insert the batteries into
the remote
8
Using Your New TV
AC power adapter
(supplied)
Note
• Do not remove the ferrite core from the AC power adapter.
Pull here.
Cable cover
Note
• The other cables may not be put in the stand.
Note
• Do not use old batteries or different types of batteries together.
To 16.5 V
16.5V
1 Pull the upper edge of the cable cover
toward you and remove it.
2 Pass the cables into the stand.
3 Replace the cable cover while aligning
the claws on the cover with the holes
on the stand.
3° forward
Right side
Rear of TV
15° backward