Power Supply; Installation And Operation - Gastros Switzerland InductWarm 130+ Undercounter Betriebs- Und Montageanleitung

Power Supply

You can chain up to four InductWarm
and connect them with the power cord (article 6 01 10x 00) to a power outlet 110V/220 V (16A).
The max. power consumption of one element is 800W.
Installation
Remove all remaining packaging and check your InductWarm
start up the appliance if there are any signs of damage.
To make transport easier in the future, please keep the original packaging.
Power on the InductWarm
on, when the green LED of the power switch and of the power select button are illuminated and the first
LED on the front control panel is blinking (stand-by mode).
Operation
Your InductWarm 130+ can be controlled in different ways:
®
• Using the internal control unit:
Repeated pressing of the power selection button lets you cycle through the different warming
zones 1, 2, 3, 4 and "OFF".
20
130+ elements with the power chain cable (article 6 13 1xx 00)
®
130+ by using the power switch on the bottom of the device. The device is
®
® 130+ device for external damage. Do not