Control Panel - Klarstein 10021654 Bedienungsanleitung

1. SETHNG THE SPEED: When the appliance starts to run, the velocity of the fan is low and the
signal of the low speed fan switches on the display. If you need to purify the air urgently, press the
button SPEED once or twice, then the velocity of the fan will tum to the medium velocity and then to
the maximum and the signal of air speed will appear on top of the display.
2. TIMER SETTING: The minimum running of the timer is 1 hour. Press the TIMER once, the timer
will increase one hour. The longest period that you can set automatically is 12 hours. After setting
the timer it will reduce continually the time of running minute per minute. The appliance will switch
off automatically when the timer displays the last minute.
3. IONIZATION FUNCTION: When you need that both the ionizer and the HEPA filter work, press
the button ANION, the signal of negative ions will appear on the display.
4. REMOTE CONTROL: This appliance is equipped with a remote control besides the manual cont-
rols on the display.
5. MEMORY FUNCTION: The previous settings are registered automatically so that the way of
running that has been settled previously will be repeated when the air purifier is restarted after swit-
ching it off with the button ON/OFF.
9

Control Panel

Control Panel
Structure