Preparations For Installation - Wetelux 80 35 67 Bedienungsanleitung

 Allow at least 1 m illuminating distance to other ob-
jects.
 Mount the lamp only on normally flammable or flame re-
sistant surfaces.
 Never cover the product when it is in use.
 Do not disassemble the unit or attempt to modify or repair it
yourself. It does not contain parts serviceable by you. In case of
questions or problems, turn to our customer service.
 Clean the housing of the spotlight only with a dry or lightly mois-
tened cloth. Do not use aggressive chemicals or abrasives for
cleaning.
Intended Use
 The LED spotlight is intended for illuminating house entrances,
driveways, etc. It may be installed in outdoor areas (taking into
account the installation location!).
 Any other use than that described above may damage the prod-
uct. Moreover, this may give rise to hazards such as short-
circuiting, fire, electric shock, etc.
 No part of the product may be modified or converted!
 The safety instructions must be observed at all times!

Preparations for Installation

 The product may only be installed by a qualified technician (e.g.
electrician) who is familiar with the relevant regulations (e.g.
VDE, German electrical wiring regulations)!
 Improper work, carried out on the mains voltage, endangers not
only your own life but also the life of others!
 If you do not have the expertise required for the installation, do
not install it yourself but ask a qualified technician.
 Observe the safety instructions!
Using
6