Blaupunkt Bluebot XSMART Robotic Kurzanleitung Seite 3

Congrats with your Blaupunkt Robot!
Follow these 7 easy steps to get started with Bluebot XSMART.
Step 1
Remove Bluebot from the box. The internal battery will be charged for its initial use.
Step 2
The box contains two cleaning components. One has bristles; the other has a rubber edge.
Take out the component with the rubber edge.
Step 3
Flip Bluebot over and attach the component with the rubber edge. This component is
ideal for general vacuum cleaning.
Step 4
Take out the two bristles marked 'L' and 'R' and attach them to the corresponding holes on
Bluebot's bottom. This may require applying some pressure.
Step 5
Take out the power adapter and charging base. Position them against the wall and make
sure that it can be easily spotted by Bluebot.
Step 6
Place Bluebot on its wheels near the charging base. Activate the robot by turning on the
on/off switch on the side of the unit. Takeout the remote control and remove the plastic strip,
which shields off the batteries.
Step 7
Point the remote control at Bluebot and press the ON button to turn it on, or
the robot. It will now clean your room using its automatic cleaning program!
button on