INNOCIGS CUBOID BODY Bedienungsanleitung Seite 49

INNOCIGS CUBOID – OPERATING & CHANGING THE DISPLAY MODE
3. Adjusting the wattage in VT mode
You can set the maximum power output in VT mode. Press the fire button 3 times to enter the menu. Press the
down button, so that the second line flashes. Then press the up button to adjust the wattage. Confirm the setting
by pressing the fire button.
Note
a) The VT mode supports a maximum resistance of 1.5 ohms. The device automatically switches to the VW mode
when the resistance is more than 1.5 ohms.
b) When using coils with Kanthal winding, the unit will change to VW mode after two seconds.
48