INNOCIGS CUBOID BODY Bedienungsanleitung Seite 44

INNOCIGS CUBOID – OPERATING & CHANGING THE DISPLAY MODE
Adjusting the TCR mode
While the Cuboid is turned off, press and hold the fire button and "up" button
at the same time for about 5 seconds to enter in the TCR-menu:
1. Press "up" or "down" buttons to switch between TCR M1, M2 and M3.
2. Confirm the desired mode by pressing the fire button.
3. Press the "up" or "down" button to increase or decrease the settings.
4. Long press the fire button or wait 10 seconds to confirm your setting.
43