Herunterladen Inhalt Inhalt Diese Seite drucken

Setting The Handset Dialling Mode; Caller Id/Clip - Topcom butler 2455 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für butler 2455:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

HANDL. B2455_euro.qxd
Butler 2455
Afterwards, you must resubscribe all handsets as described in point 4.24! However you no
longer need to set the base unit to subscription mode, because this now happens automatically!

4.33 Setting the handset dialling mode

There are two types of dialling modes:
- DTMF/Tone dialling (the most common)
- Pulse dialling (for older installations)
To change the mode of numeration:
- Press the programming key
- Press the Up or Down key
- Press the Programming key
- Press the Up or Down key
- Press the Programming key
- Select 'TONE' or 'PULSE' by means of the UP and Down key
- Press the Programming key
Note: The handset dialling mode is independent from the base (See 7.3)!! To change the dialling mode of
the base telephone you have to use the T/P switch at the bottom of the base.

5 CALLER ID/CLIP

(This service only works when you have a Caller ID/Clip subscription. Contact your telephone
company).
When you receive a call, the telephone number of the caller, the date and time appears on the
handset display. The telephone can receive calls in both FSK and DTMF. If the name is program-
med in the Phone Book, the name in the Phone Book is displayed!
The telephone can store 30 calls in a Call List that can be reviewed later. The telephone never
stores the same call twice. When the memory is full, the new calls automatically replace the
oldest calls in the memory. The symbol
answered. If the Call List is empty and you press the Up key
You can view the information of an incoming call as follows:
• Press the Up key
of the caller, the sequence number of the call in the Call List, the date and time of the call
appear on the display.
• Press the Down key
27/2/03
9:01 pm
repeatedly until 'SETTING' appears on the display.
repeatedly until 'DIAL MODE' appears on the display.
to confirm
on the display blinks if the call is not read or not
. The name (if sent by the network or present in the Phone Book memory)
. The telephone number of the caller appears on the display.
25
25
25
25
25
25
25
25
25
25
25
25
25
Page 25
, three beep tones will sound.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis