Controls
Please perform the following settings on the controller (Mode2 = Gas left):
Left stick > center
Right stick > center
Controller (Mode 2)
Model
(
Fixed height Fixed point
Fixed height
Evo Mode
Lock
Upper left switch
> 0
Upper right switch > 0
front)
The left stick (front / back) of the
controller controls the motor speed and
thus the ascent and descent of the
model. In the center, the model holds the
current altitude.
Yaw
The left stick (left or right) turns the
model around the vertical axis.
-Stick to the left
> Counterclockwise yaw
- Stick to the right
> Clockwise yaw
Roll / Nick
Through the right strick, the roll axis of
the quadrocopter is addressed. For a
forward / backward movement (pitch)
move the stick forward / back.
In GPS mode, the copter will hold the
position when you release this stick.
To activate a function on the right side,
note that the left switch is set to 0 =
Fixed height.
L0 + R0: Starting without GPS
L0 + R1: GPS-supported fly
L0 + R2: Return to start point
Auto Home
To activate a function on the left, the
right switch has to be set to 0=Fixed
height.
L0 + R0: Starting without GPS
Home
L1 + R0: No Descent
L2 + R0: Startpoint-orientated flight
37
Action
(Only with full GPS support)