Herunterladen Inhalt Inhalt Diese Seite drucken

Inhaltsverzeichnis; Caution - Yamaha TX-592RDS Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 37
FEATURES
Multi-Functions for RDS Broadcast Reception
40 Station Random Access Preset Tuning
Automatic Preset Tuning for RDS Stations
Multi-Status Station Memory
Preset Station Shifting Capability (Preset Editing)
Rotary Encoder Tuning
Direct PLL Synthesizer Tuning
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1.
This unit is a sophisticated stereo tuner. To assure proper
operation and the best possible performance, please read
this manual carefully.
2.
Choose the installation location for the unit carefully.
Avoid placing it in direct sunlight or close to a source of
heat. Also avoid locations subject to vibration and
excessive dust, heat, cold or moisture. Keep it away from
such sources of hum as transformers or motors.
3.
Do not open the cabinet, because this may result in
damage to the unit or electrical shock. If a foreign object
should get into the unit, contact your local dealer.
4.
When not planning to use this unit for long periods of time
(ie., vacation, etc.), disconnect the AC power plug from the
wall outlet.
5.
To prevent lightning damage, disconnect the AC power
plug and disconnect the antenna cable when there is an
electrical storm.
6.
When disconnecting the power plug from the wall outlet,
always pull directly on the plug; never pull the cord itself.
7.
Do not use force when operating switches and other
controls.
8.
When moving the unit, be sure to first disconnect the
power plug and disconnect all wires connected from the
unit to other equipment.
9.
Do not attempt to clean this unit with chemical solvents,
because this may damage the finish. Use a clean, dry
cloth.
10.
Be sure to read the "
TROUBLESHOOTING
manual for advice on common operating errors before
concluding that the unit is faulty.
11.
Keep this manual in a safe place for future reference.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off. This state is called the standby mode.
In this state, this unit is designed to consume a very small
quantity of power.
Thank you for selecting this YAMAHA stereo tuner
" section of this
CONTENTS
SUPPLIED ACCESSORIES ...........................................2
CAUTION........................................................................3
CONNECTIONS .............................................................4
CONTROLS AND THEIR FUNCTIONS..........................7
TUNING OPERATIONS..................................................9
PRESET TUNING.........................................................10
RECEIVING RDS STATIONS .....................................13
TROUBLESHOOTING..................................................18
SPECIFICATIONS ........................................................19
IMPORTANT
Please record the serial number of this unit in the space
below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner's Manual in a safe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin plug.
3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis