Samsung HW-K550 Benutzerhandbuch Seite 12

5. Push a screw (not supplied) through each
Holder-Screw, and then screw each screw
firmly into a support screw hole.
6. Use the two Screws (M4 x L12) to attach both
Bracket-Wall Mount L and R to the Soundbar's
bottom. For a proper fit, make sure to align the
bumps on the Soundbar to the holes on the
brackets.
When assembling, make sure the hanger part
●
of Bracket-Wall Mounts faces backwards.
Rear side of Soundbar
Right end of Soundbar
The left and right mounts are different shapes.
●
Make sure to position them correctly.
Wall Mount R
7. Install the Soundbar with the attached Bracket-
Wall Mounts by hanging the Bracket-Wall
Mounts on the Holder-Screws on the wall.
●
Wall Mount L
· 12 · English
Slightly tilt the Soundbar to insert both
Holder-Screw heads into Bracket-Wall
Mount holes. Push the Soundbar in the
direction of the arrow to make sure both sides
are firmly fixed.