UNITED OFFICE Z11063 Montagehinweise Und Sicherheitshinweise Seite 3

Computer Desk
Important, retaIn for future
reference read carefully.
Introduction
Q
Before using the product for the first
time, take time to familiarise yourself
with the product first. Read the following
assembly instructions and safety instructions care-
fully. Only use the product as described and for the
designated areas of application. Please keep these
instructions in a safe place. If you hand this product
on to a third party, you must also pass on all docu-
ments relating to the product.
Intended Use
Q
This Computer Desk is intended to be a space-saving,
mobile and ergonomic place to set up your computer.
The product is intended for domestic environment. Any
use other than previously mentioned or any product
modification is prohibited and can lead to injuries
and / or product damage. The manufacturer is not
liable for any damages caused by any use other
than for the intended purpose. The product is not
intended for commercial use.
Parts description
Q
Side frame (left)
1
Side frame (right)
2
Support beam (rear)
3
Lower shelf
4
Side pole
5
Side shelf
6
Table top
7
Keyboard tray with mouse tray
8
Castor with brake
9
Castor
10
Pins with internal threads (approx. ø 7.8 mm)
11
Hexagonal socket head screw
12
(approx. ø 5.7 x 34.7 mm)
Hexagonal socket head screw
13
(approx. ø 5.7 x 24.2 mm)
Sliding rail (left)
14
Sliding rail (right)
15
Cap
16
Spring washer
17
Phillips screw (approx. ø 4 x 10.7 mm)
18
Hexagonal socket head screw
19
(approx. ø 5.7 x 14.5 mm)
Phillips screw-driving tool
20
Hexagonal key
21
Spanner
22
Supply Scope
Q
Please check immediately on unpacking that the
delivery is complete and that the product and all
parts are in perfect condition. Do not assemble the
product under any circumstances if the delivery is
incomplete.
1 x side frame (left)
1 x side frame (right)
1 x support beam (rear)
1 x lower shelf
1 x side pole
1 x side shelf
1 x table top
1 x keyboard tray with mouse pad
2 x castor with brake
3 x castor
8 x pins with internal threads
14 x hexagonal socket head screw
8 x hexagonal socket head screw
1 x sliding rail (left)
1 x sliding rail (right)
6 x cap
7 x spring washer
8 x Philips screw
2 x hexagonal socket head screw
1 x Philips screw-driving tool
1 x hexagonal key
1 x spanner
1 x assembly instruction
Introduction
GB/IE 3