Stand-By Function; Hints And Tips; Care And Cleaning - Zanussi ZDH7332P Benutzerhandbuch

• Start/Pause indicator goes off.
1. Press the on/off button to deactivate the
appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Always clean the filter and empty the
water container when a programme
is completed.

Hints and tips

Preparing the laundry
• Close the zippers.
• Close the fasteners of the duvet covers.
• Do not keep ties or ribbons loose (e.g. apron
ribbons). Tie them before you start a
programme.
• Remove all items from the pockets.
• If an item has the internal layer made of
cotton, turn it inside out. Make sure that the
cotton layer is always external
• We recommend that you set the correct
programme applicable for the type of fabrics
that are in the appliance.
Fabric label

Care and cleaning

Cleaning the filter
1
www.zanussi.com
Laundry that is applicable for tumble dryer.
Laundry that is applicable for tumble dryer. Set the programme with standard tem-
perature.
Laundry that is applicable for tumble dryer. Set the programme with low tempera-
ture.
Laundry that is not applicable for tumble dryer.
2
2
1

Stand-by function

To decrease the energy consumption, this
function automatically deactivates the
appliance:
• After 5 minutes if you do not start the
programme.
• After 5 minutes from the end of the
programme.
• Do not put fabrics with strong colours
together with fabrics with light colours.
Strong colours can bleed.
• Use an applicable programme for cotton
jersey and knitwear to prevent the items to
shrink.
• Make sure that the laundry weight is not
more than the maximum weight that is in the
programme table.
• Dry only the laundry that is applicable for
tumble dryer. Refer to the fabric label on the
items.
Description
3
1
2
4
23