Skandika Fitness SF-1510 Bedienungsanleitung Seite 20

ENGLISH
ASSEMBLY INSTRUCTIONS
Adjustment
Bolt Location
If the running belt is off center to the LEFT (fig.10):
Use the Allen Wrench
a. to turn the left rear roller adjustment bolt 1/4 turn in clockwise direction, which moves the running
belt to the right.
b. or turn the right rear roller adjustment bolt 1/4 turn in counterclockwise direction, which moves
the running belt to the right.
If the running belt is off center to the RIGHT (fig.11):
Use the Allen Wrench
a. to turn the right rear roller adjustment bolt 1/4 turn in clockwise direction, which moves the running
belt to the left.
b. or turn the left rear roller adjustment bolt 1/4 turn in counterclockwise direction, which moves the
running belt to the left.
Caution:
- Do not turn the adjustment bolts more than 1/4 turn at a
time. Overtightening the belt can damage the treadmill.
- Be very careful to keep your fingers and any objects
away from the belt and rollers.
20
CENTERING THE BELT:
1. If the belt is slightly off-center, first run the treadmill without
anyone on it at 10 kph (6 mph) for at least 5~10 minutes to see
whether the treadmill could automatically center the running
belt. If not, move to step 2 to start centering the belt.
2. Stand behind the treadmill, with the treadmill running at 10
kph (6 mph) observe the running belt. If the belt tracks off cen-
ter to the left or right, pay attention to the following process to
Fig.10
center the belt.
Adjustment
Bolt Location
Fig.11