JETTE JONATHAN Bedienungsanleitung Seite 15

GB
To ensure maximum safety for your child, adjust the safety belt's length to
its height. The safety belt should be just long enough to be tight.
Backrest adjustment:
Pull the handle provided on the backrest upward and move the backrest into
the position requested before you release the handle (8).
Attaching / removing the retaining bracket:
Fix the retaining bracket's clips directly at the frame. To remove the bracket,
unfasten the clips and pull off the bracket (fig. 9).
Attaching the roof:
Plug both plastic clips of the roof (fig. 10a) into the respective mounting
fixture on the frame. Additionally, use the Velcro to affix the roof's straps on
the sides to the pusher bar. The roof can now be put up (10b).
Important note: always make sure to sure fold up the roof before you fold
the buggy.
Folding up:
Fold up the roof first. Now press the backrest-handle and move both
backrests into front position. At the same time, pull the textile handle at the
backrest all the way up with one hand (1) while you pull the handle provid-
ed at the frame upward with the other hand (2). The folding lock is thus
released and you can fold up the buggy (3).
Finally, re-engage the safety lock (fig. 1).
To fold up the buggy in an even more compact manner, both release handles
on the backrest can be pressed additionally and folded (4). Repeat on the
other side (5).